Back to start page Back to product page OCV Reinforcements site

Continuous Filament Mats Direct access Products available Applications Similar products Unifilo is an E-glass continuous filament mat of random orientation in multiple layers held together by a binder. Vetrotex propose a large range of continuous filament mat products suitable for all the applications where this reinforcement is generally employed.   PRODUCTS AVAILABLE Ref Processing and characteristics Data sheet Material Safety Data sheet U801 U809 U812 U813 U814 U816 U817 U822 U850 U851 U852 All Unifilo mats in this series allow an easy and even resin flow thanks to a low binder solubility. U801, is recommended for highly complex shapes, U809 for Poly Urethane foam reinforcement. U812 U813 U814 for general use and U816 U817 and U822 for relatively flat shapes. U801 is suitable for reinforcing low density polyurethane foam, or for complex parts moulded at low pressure. U812, U813, U814, U816 U817 and U822 are intended for moulding by injection (RTM, vacuum, SRIM) or by compression (wet, hot or cold). U850, U851, U852 are especially designed for easy impregnation for use with filled resins. All these products are compatible with polyester, ninylester, urethane and epoxy resins. U720 U740 U750 U756 Unitop T754 Unistretch S750 All 700 series Unifilo mats are designed to be preformed to the same dimensions and shape of the moulded part. They are all compatible with polyester, vinylester, urethane and epoxy resins, and are used for moulding by injection (RTM, RIM) and compression. U720 is intended for automatic processing where strength and durability of the preform are needed. U750 allows an easy impregnation, and is suited for use with filled resins. T754 is a "Unitop" product (top = transverse orientated properties), giving very good mechanical properties in the transverse direction of the mat. S750 features a high and evenly deformable capability. APPLICATIONS Series 700 and 800 mats are used to manufacture truck, car and bus body panels, boats, windmill blades and several other large sized components using RTM technology. SRIM is employed to manufacture interior car components such as doors panels and dashboards. With the 700 series Unifilo Mats, a service of preforms can be provided. SIMILAR PRODUCTS There is a complementary product to Unifilo: the Multimat from OCV Technical Fabrics